When thinking about weed control in wheat stubble, there are two priorities – controlling already emerged weeds and preventing later flushes. Making applications before weeds exceed 4 to 6 inches is necessary for good control of already emerged weeds, in an ideal situation, which is hard to come by. Residual herbicides are needed to reduce the number of herbicide applications needed to control multiple flushes of weeds.
Gramoxone (paraquat) is a non-selective, contact herbicide that can be used in fallow fields. It should be applied at 0.5 to 1.0 pounds of paraquat/A, which is equal to 2 to 4 pints of GramoxoneSL 2.0 or 1.3 to 2.7 pints of GramoxoneSL 3.0. Thorough spray coverage is important for good control, which means medium to coarse droplet sizes and greater spray volumes (20 GPA or more). Gramoxone should be applied with NIS, COC, or MSO. Because paraquat is a contact herbicide regrowth is common, especially of large weeds. Adding a Group 5 herbicide, such as atrazine or metribuzin can enhance control of larger weeds and add some residual activity. Atrazine will also help control volunteer wheat. It’s also important to remember that paraquat is a restricted-use pesticide that requires additional training for handling. Potato Plant Growth Regulators
Sharpen (saflufenacil) is a Group 14 herbicide that is primarily a contact herbicide but also provides some residual activity. Use 2 to 3 oz/A for larger weeds and residual activity. Sharpen works best with the addition of methylated seed oil. Sharpen requires complete coverage so using 15 to 20 gallons/acre spray solution is important.
Valor (flumioxazin) can provide contact and residual activity of key species like pigweeds. Valor EZ can be applied at 2 to 4 fl oz/A. Crop rotation should be considered when selecting the application rate. The 4 fl oz rate has a 4-month rotation interval for corn, cotton, sorghum, soybean, sunflower, and wheat; but lower rates have fewer restrictions. If targeting emerged weeds, NIS or COC should be included in the application.
All herbicides are most effective when applied to weeds that are actively growing. This means it is necessary to wait for at least 2-3 inches of regrowth if weeds were cut off by the combine. It may be tempting to wait for further delay applications to wait for later weed flushes; however, consider including a product with residual activity, rather than waiting, in order to prevent poor control of large weeds. Additional information can be found in the 2021 Chemical Weed Control for Field Crops, Pastures, Rangeland, and Noncropland, K-State publication SRP-1162.
The use of trade names is for clarity to readers and does not imply endorsement of a particular product, nor does exclusion imply non-approval. Always consult the herbicide label for the most current use requirements.
Stacy Campbell is a Crop Production agent in the Cottonwood District (which includes Barton and Ellis counties) for K-State Research and Extension. You can contact him by e-mail at [email protected] or calling 785-628-9430.
Cypermethrin 10 Copyright © 2023 Hays Post - Powered byEagle Radio